JT’s Tree Tips
June 2021
It really looks like we will be able to meet in person beginning in July on the first Thursday. I spoke to Rachael at Good Samaritan Episcopal Church who gave us protocols we need to follow to open. See Jack’s President’s Message remarks. I’m excited to pull the trigger on this! In the meantime…
Black Pines
From now until early July is the time to do it. Larger trees first, then shohin in early July. However, the foolproof and best time (it’s not so much a time or date as it is a condition) is when the new needles extend out and away from the candles. Weak candles that have not extended at all leave intact. Short candles on inside and lower part of tree cut at the base. Medium strength candles cut about 1 to 1 ½ times the diameter of the candle above the base of the candle. For the strongest, cut about 2 to 2 ½ times the diameter of the candle above the base. This helps give weaker candle area a head start in developing uniform budding. If your needles don’t extend by the end of June, cut them back anyway. You must allow sufficient time to form the new buds. Much later and they may not set well.
If this is too complicated for you and you would like to use an alternate method, cut all candles, regardless of size or strength, at the base. Then pluck needles on the strongest areas to equalize the strength of the tree. Since you have been fertilizing heavily to this point, pull off the fertilizer and don’t resume until late in the summer when new candles are growing. Regardless of the technique you use, you can regulate the growth to the tree by equalizing the needle load.
Fertilization
Fertilize your trees regularly. If you keep your trees healthy throughout the year, they can stand up to the extraordinary work we want to do with them. I have described the use of organic fertilizer each year. This year, I Mixed up a concoction of organic fertilizer (Dr. Earth 5-5-5) and composted chicken manure. I mix this dry, putting an ounce of it in a tea bag. I then dip each teabag in a mixture of fish emulsion before placing two bags on a small tree or four on the corners of a larger tree. Be sure to wear latex gloves or your hands will smell nasty for a while. The nitrogen part should break down in about a month so I add a second set of bags at 4 week intervals throughout the year. Stretch it to 6 weeks if you are trying to keep a refined tree from growing out of shape. Daily watering breaks it down steadily, and it also adds organic matter to my soil which is almost entirely aggregate. The chicken manure is Jong’s GroBetter Organic Fertilizer, a composted and pelletized fertilizer from chicken manure chicken. I got it at Regan’s nursery on Decoto Road off 880.
Alternately, or in conjunction with the above, you can also use chemical fertilizer as either the primary or secondary fertilizer. In addition, a product like Dyna-Grow® or MiracleGro® has all the trace elements that the plant needs. I have also used Bayer’s 2-in-1 Systemic Rose & Flower Care Fertilizer.
Other Trees
For most trees in the developing stage, the initial shoot that has come out this year should be wired this time of year. You want to get movement for about the first three buds, or about 2 1/2 inches that you will let grow and thicken until autumn. Then you will cut back to those three buds. This will set the movement and give you taper when the next year’s growth comes out and you wire the shoots from these three buds. Following this yearly pattern you will increase the buds to 9 the following year (3 x 3) and 27 the next year (3 x 3 x 3). Each year the sections nearest the trunk will get a little thicker than the ones farthest out on the branch and give you increasing ramification and natural taper.
Pinching and Pruning
This is an important time of the year to keep the growth pinched back or pruned back on refined trees. These are the trees that you want to show this year or are at a highly refined level.
Pinching on refined trees, is done with the fleshy pads of the thumb and forefinger, not the nails. It is used to pluck the new succulent growth back to 1 to 3 leaves before it has begun to elongate. By pinching it at this juvenile stage it stops the internodes (space between the leaves) from elongating. If you don’t catch it, the space between these leaves will stretch like a pulled rubber band until the shoot starts to form wood and the elongation process stops. By pinching it, the wood making process begins immediately, thus keeping the internodes compact. The farther out on the tree this is done the more crucial this work is. This is a handy technique to keep shoots from jumping out of the branch silhouette you have established.
Pruning is cutting back with scissors. If you try to pinch a shoot and it is hard to do or leaves a hardened core at the site, wood has formed and you need to use bonsai shears. Sometimes the initial growth has gotten so long — in other words, the first leaf is too far out on the shoot — that the entire shoot must be cut back to the base and started over. Otherwise, the ramification will look odd and the effect will look bad. Pruning is also performed to shape the structure of the tree, or to induce back budding.
Air Layering
The May and June time-frame is the perfect time to air layer a tree. Air layering is inducing a tree to generate roots from an upper branch of a tree (the scion) and then cutting off the upper portion to make a new tree. If you have an interesting top or branch of a tree and what is under it is ugly, you have a candidate for this operation.
To start the process, determine the angle and front of the proposed new tree on the existing trunk. Draw a line around the trunk and then use a sharp knife to cut the top line all the way around the trunk. Mark another line around the trunk about one trunk diameter below the first line. Then remove all of the bark between the two horizontal cuts making sure to removed all the bark down to the cambium layer and a little into the xylem or newest wood.
Treat the bark area just above the upper cut with the rooting hormone Dip n grow®, wrap wet sphagnum moss around the trunk 2 inches above and below the exposed, barkless area, and place a plastic bag around the moss. Tie it above and below with wire to hold the sphagnum moss in place against the barkless area. Lastly, put some black plastic bag material over the plastic wrap to shade the area from the sun.
For aftercare, water the top of the bag regularly, check periodically to be sure that the sphagnum moss is damp, and to see if any new roots have formed. Rotate the tree weekly to ensure uniform root formation around trunk. Don’t remove any branches or foliage during this layering time period. Roots will form faster if the growth is unchecked above the layer. 6 to 8 weeks should do it for most deciduous trees. Conifers take longer and in some cases may take up to 2 years to root out before you can separated from the under-tree.
Pest Control
Spray appropriately when you see critters or regularly for fungus on an ongoing basis. Try doing it in the early evening so it doesn’t immediately burn the foliage in the hot sun. Take care of pest problems now before they become more serious.
Increasing Ramification
To increase ramification and get smaller leaves, partially defoliate deciduous trees except beeches, ginkgoes, and the like this month through the middle of July. The upper and stronger regions of the tree can be fully defoliated on many trees to allow sun to get below. Partially defoliate about 2/3 of the exterior areas of your tree where you need more vigor and ramification. Leave those areas towards the inside of the tree in leaf.
